USP Connectors
USP Connector Products

Concrete and Masonry

Code-listed connectors for concrete and masonry designed to transfer tension loads in a wide variety of applications.  

 

Anchor Bolts

AB series

USP anchor bolts designed for general capacity applications.

STB series

USP anchor bolts designed for higher capacity applications.
Reference Series: SSTB series

STBL series

USP anchor bolts designed for higher capacity applications.
Reference Series: SSTB series


 

Beam Seats

KGLB series

Seats for beams bearing on concrete or masonry.
Reference Series: GLB series

KGLBT series

Seats for beams bearing on concrete or masonry.
Reference Series: GLBT series

KHGLB series

Seats for beams bearing on concrete or masonry.
Reference Series: HGLB series


 

Bearing Plates

BP series

Bearing plates.
Reference Series: BP series

HBPS series

Slotted bearing plates.
Reference Series: BPS series

LBP series

Bearing plates.
Reference Series: LBP series

LBPS series

Slotted bearing plates.
Reference Series: LBPS series


 

Concrete Form Ties and Wedge

FT series

Low foundation concrete form tie.
Reference Series: WT series

WG

Wedge for FT concrete form tie.
Reference Series: W1


 

Coupler Nuts

CNW series

Coupler Nuts join threaded rods to embedded anchor rods.
Reference Series: CNW series


 

Foundation Anchors

FA3

Embedded mudsill and stud anchor.
Reference Series: MAS

FA4

Embedded mudsill and stud anchor.
Reference Series: MASA

FWAN-TZ

Transfers in-plane and out-of-plane foundation wall loads through the joist/blocking into the floor diaphragm.
Reference Series: FWANZ

SFA8

Mudsill anchors for retrofit applications.

SFJA

Bolted mudsill anchors for retrofit applications.
Reference Series: FJA

SRC

Sill retrofit connector.
Reference Series: UFP10-SDS3

SRCP

Sill retrofit connector plate.
Reference Series: FAP

ST series

Embedded mudsill anchors.
Reference Series: ST series


 

Girder Tiedowns

DHTA series

Two-strap design with moisture barrier seat provides uplift and lateral load resistance for single-ply and two-ply truss applications.
Reference Series: DETAL20

DTC

Strap truss anchor provides uplift and higher lateral load resistance.
Reference Series: HETAL series

HHTA series

Strap truss anchor provides higher uplift and lateral load resistance compared to the TA series.
Reference Series: HHETA series

HLPTA75

Low profile truss anchors provide uplift and lateral load resistance.

HTA series

Strap truss anchor provides higher uplift and lateral load resistance compared to the TA series.
Reference Series: HETA series, META series

HUGT series

Heavy-capacity girder truss anchor installs over the top chord and bolts to the concrete or tension tie.
Reference Series: HGT series

LUGT series

Light-capacity girder truss anchor nails to the truss/rafter and the stud. Can also be used for masonry applications.
Reference Series: H10S, LGT series

MUGT15

Medium-capacity girder truss anchor wraps over the top chord and bolts to the concrete or tension tie.
Reference Series: MGT

TA series

Strap truss anchor provides uplift and lateral load resistance.

TAR series

Riveted anchors provide a moisture barrier in addition to uplift and lateral resistance all in one product.


 

Hangers

HWUH series

Heavy-capacity top flange masonry hanger.

KGH series

Top flange hanger secures girder beam to foundation wall.
Reference Series: GH series

MPH series

Top flange masonry hanger.
Reference Series: WM series, WMI series

NFM series

Narrow top flange hanger for headers connecting to the end of a masonry wall.
Reference Series: MBHA series

UMH series

Face mount masonry hanger.
Reference Series: MBHU series


 

Hex Nuts

HN series

Standard hex nuts


 

Holdowns

LSTAD series

Embedded strap holdowns for built-up 2x end posts.
Reference Series: LSTHD series

STAD series

Embedded strap holdowns for built-up 2x end posts.
Reference Series: STHD series

TA series

Straps through masonry foundation wall.

TD series

Standard holdown. Connects to post with bolts.
Reference Series: HD series

TDX series

Standard holdown. Connects to post with bolts.
Reference Series: HDB series

UPHD series

High capacity holdown. Connects to post with wood screws.
Reference Series: HDQ series, HDU series, HHDQ series


 

Mechanical Anchors

HD5 series

Fully threaded, torque-controlled, wedge expansion anchor.
Reference Series: WA series

SD series

One-piece, heavy-duty screw anchor with a finished head for cracked and uncracked concrete.
Reference Series: THD series


 

Purlin Anchors

HPA series

Embedded strap for concrete to purlin connections.
Reference Series: HPA series

PA series

Embedded strap for concrete to purlin connections.
Reference Series: PA series

PAI series

Embedded strap for concrete to purlin connections.
Reference Series: PAI series


 

Retrofit Plates

RP6

Oversized plate to distribute forces on masonry surface.
Reference Series: RP6


 

Straps

HTWM series

Heavy-capacity twist masonry strap connects to concrete or masonry walls.
Reference Series: HTSM series, MTSM series

MSTAM series

1/4" wide flat masonry strapping.
Reference Series: MSTAM series

MSTCM series

3" wide flat masonry strapping.
Reference Series: MSTCM series


 

Threaded Rods

ATR series

All Thread Rods for anchoring USP's holdowns, tension ties, and wood structural panel shear walls to concrete.
Reference Series: ATR series

THR series

Threaded Rod.
Reference Series: RFB series


 

Truss Tiedowns

LPTA

Low profile truss anchors provide uplift and lateral load resistance.
Reference Series: LTA2

RT16M

Retro-fit connector for trusses installed on top plates.
Reference Series: HM9KT

STC series

A scissor truss clip with slotted nail holes for horizontal movement.
Reference Series: TC series


 

Wall Ties

WT22

Wall ties secure brick or rock veneer to wood frame walls.
Reference Series: BTB


 

Washers

RW series

Round washers distribute load from the tightened nut and reduce bearing stresses to prevent crushing of the supporting material.